- 6695 Colray Ct, Jacksonville, FL 32258
- Mon–Sat 8:00am–7:00pm
If you are looking for the best concrete blasting Jacksonville FL services, JCV Tow Hitch is here to help.
Strip old coatings, efflorescence, oil stains, and curing compounds from driveways, garages, pool decks, and foundations without weakening the slab. JCV Tow Hitch uses calibrated abrasive blasting matched to your concrete’s age and condition — opening the correct surface profile for epoxy, sealant, or paint to bond properly the first time.
Projects Completed
Years Experience
Satisfaction Guaranteed
Concrete blasting — also called concrete sandblasting or abrasive surface preparation — uses a controlled stream of abrasive media to strip old coatings, sealers, paint, efflorescence, oil stains, and curing compound residue from concrete surfaces. It also opens a mechanical surface profile, measured against the International Concrete Repair Institute’s CSP (Concrete Surface Profile) chips, so that epoxy coatings, sealants, and paint bond properly instead of peeling within a year or two.
At JCV Tow Hitch, our Jacksonville concrete blasting technicians select abrasive media — typically garnet, crushed glass, or steel grit — based on slab thickness, age, and the coating being removed. All projects follow OSHA’s respirable crystalline silica standard for construction, and our crews use wet suppression and HEPA-filtered containment so dust never becomes a hazard to your crew, tenants, or neighbors. Properly profiled concrete accepts new coatings far more effectively, per guidance from the American Concrete Institute, meaning longer-lasting results and fewer costly recoats.
Garnet, crushed glass, steel grit
No pitting, no structural weakening
OSHA silica & EPA compliant
Transparent pricing, no surprises
From stained driveways to entire parking structures — if it’s concrete and needs coating removal or surface profiling, we have the media and technique to handle it safely.
Oil stains, failed sealer, and years of tire marks leave concrete driveways blotchy and worn. Our driveway blasting strips old coatings, efflorescence, and surface contamination down to clean, sound concrete — ready for a fresh sealer or decorative coating that actually bonds and lasts.
Worn striping, old traffic coatings, and tire residue make a structurally sound garage look run down. Concrete blasting strips multiple coating layers quickly and evenly across large decks — leaving a profiled surface that holds new striping or a traffic coating system for years.
Florida humidity leaves pool decks slick with algae, calcium staining, and failed coatings. We remove grime and old coatings from broom-finished, stamped, and exposed-aggregate concrete while preserving the texture and slip resistance your pool deck needs.
Failing epoxy, chemical staining, and worn traffic coatings are far more efficiently removed by media blasting than by mechanical grinding alone. We strip large industrial floor areas down to a clean CSP profile in a fraction of the downtime your facility would otherwise lose.
Efflorescence, mildew, and old waterproof coatings on foundation walls respond extremely well to media blasting. We strip exterior and interior foundation walls and retaining walls back to clean concrete, preparing the surface for new waterproofing or decorative finishes.
High-traffic loading docks and ramps take a beating from forklifts, grease, and chemical spills. Media blasting cleans years of grime, oil staining, and surface degradation from these heavy-use slabs without altering the load-bearing structure — perfect ahead of repaving or recoating.
We visit your Jacksonville property to inspect the concrete, assess its age and condition, determine what coatings or contaminants need to be removed, and identify the surface profile required for your next finish. You receive a detailed written estimate with zero obligation.
We protect adjacent surfaces, vehicles, and landscaping with masking and containment. Wet suppression and HEPA-filtered dust controls are set up in line with OSHA's crystalline silica standard and EPA requirements before any blasting begins.
Choosing the wrong pressure or media can damage the slab permanently. We match the industrial abrasive — such as garnet, crushed glass, or steel grit — to your concrete's age, compressive strength, and the required International Concrete Repair Institute (ICRI) CSP profile. Pressure settings are always dialed in on a small test area first.
Our certified technicians work methodically across the surface, maintaining consistent distance and angle to strip old coatings, efflorescence, and staining uniformly. The slab's structural surface is opened cleanly — not pitted or weakened — leaving a sound, profiled substrate.
Once blasting is complete, all spent media, stripped coatings, and dust are vacuumed and disposed of responsibly following EPA guidelines. We leave your property clean — no media tracked into landscaping, storm drains, or adjacent units.
Freshly blasted concrete accepts epoxy, sealant, and paint at a dramatically deeper level than ground or chemically stripped concrete. If you'd like us to apply the new finish, our professional painting team can handle that too — one project, one crew.
Concrete is unforgiving — too much pressure and you’ve over-profiled or pitted a slab that’s expensive to fix. We get it right the first time, every time.
We don't blast concrete the same way we blast wood or brick. Our technicians are trained specifically in media selection and CSP profiling for slabs of different ages, strengths, and conditions.
Before blasting any significant area, we always test on a small, inconspicuous section first — adjusting media, pressure, and nozzle angle until the surface profile matches what your next coating requires.
Fully licensed and insured for every residential and commercial concrete blasting project in Jacksonville and Northeast Florida. Dust controls follow OSHA's respirable crystalline silica standard, and media disposal always meets EPA standards.
You receive a detailed written estimate before we touch anything. Line-item pricing, scope of work, and expected timeline — no verbal guesses, no hidden charges on invoice day.
Every concrete blasting project is backed by our written workmanship warranty. If the result doesn't match what we promised, we make it right. Your satisfaction is not a bonus — it's the standard.
Reliability, quality workmanship, and professional service — hear it directly from Jacksonville-area property owners.
Common questions from Jacksonville homeowners and property managers about concrete blasting services, safety, cost, and what to expect. Don’t see your question? Call us directly.
Call us at +1(352) 651 0151. We give straight answers — no runaround.
Our team responds quickly — usually within one business day. Get your written concrete blasting estimate today.
Describe your project. We’ll respond with honest pricing and a clear timeline.
+1(352) 651 0151
6695 Colray Ct, Jacksonville, FL 32258
Mon – Sat: 8:00am – 7:00pm
